Page 1 2
80/90 S2/RS2
Another first for Pipercross - the K-Jetronic system requires that the intricate metering head on the airbox is used to ensure the correct air/fuel ratio. By redesigning the lower section of the airbox, the metering head is retained and the car is able to make full benefit of the increased airflow and performance.
The induction kit will give a more noticeable increase in power and torque. After a very long period of time when there is a bit of dust build up they do not need to be replaced. They can simply be washed and reused..
They are a direct replacement for the original lower part of your airbox so they just bolt straight on. Easy to fit.
(Click to Enlarge)
(Click to Enlarge)
Audi 80/90 (08/82-09/91) - 1.8, 2.0, 2.2, 2.3
£99
The BMC Carbon Dynamic Airbox induction kit is made up of a carbon fibre airbox containing a unique filtering element.
The carbon fibre airbox acts as a heatshield to keep the heat out so that the induction kit performs at its highest peak at all times.
The kit also contains a flexible aliminium tube, which you direct to a frontal air intake on your car to enable constant air flow through the induction kit, into the engine.
Fresh air is channeled in to the engine through the filter and air flow deflector with minimum loss of power. By increasing the airflow at a speed and capacity greater than your standard airbox, the engine performance and torque are increased.
The induction kit simply replaces your standard air box so the kit is very easy to fit and comes complete with all fittings needed.
(Click to Enlarge)
(Click to Enlarge)
(Click to Enlarge)
(Click to Enlarge)
Audi 80/90 Saloon/Avant/Coupe/Convertible - 2.8 V6 engines
Audi S2
Audi RS2
£210
£215
£215
(Click to Enlarge)
(Click to Enlarge)
The BMC Direct Intake Air System induction kit is a less expensive alternative to the CDA induction kit (above).
It performs in the same way as the CDA kit but uses a plastic airbox instead of a carbon fibre airbox.
The kit also contains a flexible aliminium tube, which you direct to a frontal air intake on your car to enable constant air flow through the induction kit, into the engine.
The induction kit simply replaces your standard air box so the kit is very easy to fit and comes complete with all fittings needed.
(Click to Enlarge)
(Click to Enlarge)
Audi 80/90 Saloon/Avant/Coupe/Convertible - 2.8 V6 engines
£130
(Click to Enlarge)
These Jetex direct bolt on air induction kits for the Audi 80/90 replace your standard air box and help the engine breathe much better and produce more performance from the engine by increasing the air flow.
The throttle response is also improved and they give a much more sportier sound.
Each kit is supplied with a high performance air filter and all fittings needed.
They simply bolt on so can easily be fitted by anyone.
(Click to Enlarge)
(Click to Enlarge)
Audi 80/90 Saloon/Coupe/Avant/Convertible (09/91 onwards) - 1.9TD engines
Audi 80/90 Saloon/Coupe/Avant/Convertible (09/91-1994) - 1.9TDi engines
Audi 80/90 Saloon/Coupe/Avant/Convertible (1994 onwards) - 1.9TDi engines
£80
£70
£80
(Click to Enlarge)
(Click to Enlarge)
About Us
